Bewertungen zu Zinsser AllCoat Exterior Satin (Solvent Based) Tintable

Zinsser Allcoat Exterior Satin Solvent-Based - Ultimate Performance All-Surface Paint Designed for long-term decoration. This low-maintenance, water-shedding coating is ideal for use on various exterior surfaces including wood, uPVC, galvanising, steel, aluminium, cladding, stucco, brick, stone, and cured concrete. For all paintable exterior surfaces, it is ideal for low temperature applications where a water based coating may not be suitable. Key Features Multi-surface application: Suitable for a wide range of exterior surfaces. Quick drying: Recoatable in just 3 hours, ensuring efficient project completion. Weather resistant: Excellent durability against the elements, maintaining a fresh appearance. Fungal protection: Contains a biocide to prevent fungal degradation of the dried coating. Temperature application: Can be applied at temperatures as low as 5°C. Long-lasting: Provides up to 15 years of protection before requiring maintenance. Application Instructions Ensure surfaces are clean, sound, and free of dirt, dust, grease, wax, or loose paint. Remove any existing mould and mildew using a fungicidal wash. Treat timber at risk of decay or insect attack with a suitable preservative. For hard or glossy surfaces, abrade and degrease before painting. Fill all nail holes and gouges before application. Stir the paint well before using and apply in temperatures between 5°C and 32°C with less than 80% humidity. For airless spray, use a tip size of 0.13 - 0.017 at a pressure of 1800 – 2400 psi. Two coats are generally recommended, with an additional coat on high exposure areas like sills and fascia boards. For Composite Surfaces; Always ensure that the surface has been prepared sufficiently, Zinsser Universal Degreaser & Cleaner is ideal for this. As composite surfaces tend to have a wax like finish we would also advise lightly abrading the surface area. Two coats are required, the first coat acts as the primer and the second seals and protects the system Precautions and Limitations Not suitable for application to exterior floors, decks, or surfaces subject to water immersion. Avoid using the product in confined spaces without adequate ventilation. Prevent product from skinning over by closing the container tightly after each use. If scraping or sanding old paint, be aware of potential lead dust exposure. Lead is toxic and can cause serious health issues. Recommended Products Zinsser B-I-N Primer-Sealer: For spot priming knots and sap streaks. Zinsser Brush Cleaner and Restorer: For cleaning dried product from application tools. Safety Information UN Number: 1263. The product is flammable (Flam. Liq. 3, H226), may cause an allergic skin reaction (Skin Sens. 1, H317), respiratory irritation (STOT SE 3, H335), and drowsiness or dizziness (STOT SE 3, H336). It is toxic to aquatic life with long-lasting effects (Aquatic Chronic 2, H411). Contains no Diisocyanates.