Bewertungen zu Blackfriar Professional Polyurethane Floor Paint

Blackfriar Professional Polyurethane Floor Paint protects and transforms floors with an attractive, tough and hardwearing finish. Resists oil, grease and chemicals, making it ideal for indoor and outdoor industrial and domestic surfaces. Recommended Uses Wood Concrete Cement Metal Brickwork Preparation Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Polyurethane Floor Paint. Application Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Floor Sealer followed by 1-2 coats of Blackfriar Professional Polyurethane Floor Paint. On previously painted surfaces apply 1-2 coats as required. Blackfriar Professional Polyurethane Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles, asphalt floors or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed by Blackfriar Professional Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Polyurethane Floor Paint. Surfaces are slippery when wet. To ensure slip resistance the floor must be kept dry when in use. The use of protective mats will help preserve the surface under tyres. Drying Time 4-6hrs @20°C. Allow to dry for a minimum of 16hrs @20°C between coats. Allow to dry for a minimum of 48hrs @20°C before subjecting to heavy traffic. Full cure is achieved in 5- 7 days @20°C. Clean Up Remove as much product from application equipment as possible before washing with a suitable brush cleaner or White Spirits. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.