Bewertungen zu Sandtex Quick Dry Stabilising Solution - Clear - 2.5 Litre

Overview Sandtex Retail Quick Drying Stabilising Solution is a water-based, quick drying stabilising priming coat ideal for preparing chalky, powdery or weathered surfaces. Suitable for most exterior surfaces, this highly penetrative primer and stabilising solution is designed to thoroughly prepare masonry surfaces prior to painting, providing a sealed and stable surface that paint can easily adhere to. The ready-to-use, easy-to-apply formulation dries in only 4 hours. Suitable for both professional and DIY use, this product can be used on render, roughcast, pebbledash and brickwork. Prepares for good adhesion of masonry paint Seals & stabilises chalky, powdery or weathered surfaces Easy to apply Ready to paint over in 4 hours Suited to most exterior surfaces Clear Solution Area Exterior Recommended Use Ideal to prepare pebbledash, seal render, porous surfaces, crumbling bricks, seal concrete blocks, porous bricks and weathered bricks. Base Water-Based Coverage Up to 10m² per litre Drying Time 4 hours Re-Coat Time 4 hours Recommended Coats 1-2 Coats Application Method Brush VOC Levels Minimal Clean Up Remove as much product as possible from the equipment before cleaning with water Preparation All surfaces must be clean, dry and free from anything that may interfere with adhesion before applying Sandtex Quick Drying Stabilising Solution. Any faults in the surface must be repaired as these may lead to moisture penetration. Remove all loose and flaking material by scraping or brushing with a stiff brush. All signs of organic growth must be removed by brushing with a stiff-bristle brush. Kill spores with a fungicidal wash. Application We always recommend testing the product on the surface to ensure compatibility. Sandtex Stabilising Solution is ready to use and must not be diluted or mixed with decorative materials. Apply one coat with a brush, one coat should be sufficient. Allow to dry for applying any top coats. Always follow manufacturer instructions found on the packaging