Bewertungen zu Universal Cell Phone Case Replacement Magnets

Description Connect Any Phone to Our Universal EMF Shielding Wallet Cover If your original adhesive plate has lost its grip, or you have switched to a new phone and need a fresh plate, this replacement pack allows you to continue using your DefenderShield Universal Phone Wallet Cover. Three plates are included — one large (4” × 2.5”) and two small (2.5” × 1.75” each). Use the single large plate for most phones, or the two smaller plates if your camera lens sits in the center of the phone’s back. The plates are made for the DefenderShield Universal Phone Case. How to use 1. Choose your plate configuration. Use the single large plate if your phone’s camera is near the top or corner. Use the two smaller plates side by side if the camera lens sits in the center of the back. 2. Peel the 3M backing. Remove the adhesive backing to expose the sticky surface. 3. Press the plate onto your phone. Adhere it firmly to the back of your phone — we advise adhering to an existing slim phone case nesting if possible (not included) instead of the phone itself, as connecting to the phone directly may make removal difficult without damaging the finish of your phone. Do NOT adhere the metal plates to the actual DefenderShield Wallet Case Cover. 4. Magnetize to the wallet cover. Align the plate on the back of your phone with the magnetic inside back cover of the DefenderShield Universal Phone Case. Specifications Specification Detail Pack Contents 3 plates — 1 large + 2 small Large Plate Dimensions 4.00” × 2.50” Small Plate Dimensions 2.50” × 1.75” (each) Adhesive 3M backing — peel and stick Compatible Products DefenderShield Universal Phone Case · DefenderShield Magnetic Car Mount Recommended Application Adhere to existing 3rd party phone nesting if possible, but can be adhered directly to the back of your phone. HSA / FSA Eligible Yes — see if you qualify at checkout Price $4.99