Bewertungen zu Henderson Pre-Premier Cones & Cables

A pair of Henderson garage door cones and cables to suit all vertically tracked Pre-Premier doors, manufactured before 1992. The door will have a single torsion spring running across the top of the garage door. The cables can be easily identified by the looped end at the bottom of the cable - doors manufactured post-1992 had a studded end to the cable. Included are two roll pins and a tension crook pin. A 4mm pin punch is required for the removal of the existing cones. If both cables on the door are snapped, the spring will require re-tensioning. If this is the case a re-tensioning kit can be found here. This can also be useful if the spring has lost some tension from wear and tear over the years of use. Henderson part number: 032016 Note : The colour of cones may differ from originals. The cones are handed left and right as marked on the cone itself. How can I identify if this is the part I need? The cables for this type of door can easily be identified by the looped end at the bottom of the cable. This is in opposition to the Premier cones and cables which have a 'stop' end (i.e. a ferrule crimped to the end of the cable). These cables will fit all Henderson Pre-Premier canopy doors, which is all single-width canopy garage doors manufactured pre-1992. These cones & cables will also fit less common double-width canopy doors, known as a 'Double Merlin'. This cone & cable set should not be confused with the later Premier model of door, manufactured post-1992, where the cables had studded ends instead of loops. If you require these, they can be found here. How can I install the new Henderon Pre-Premier cones and cables? You can find the fitting instructions either by clicking the tab just above with the same name or by clicking here for the PDF version of the same instructions. If only one door cable has snapped, the remaining cable will be holding the tension in the spring. It is recommended to replace both sides, first replacing the broken cable. I have some questions, how can I contact you? There are a few ways you can use to get in touch with us here. The main way most clients decide to contact us is to call in simply at 01704 331 705 during business hours which are 9am-10pm. This allows you a lot of freedom, and our customer service team works around the clock to make sure you are helped out with your queries. Alternatively you can send a message to our WhatsApp at 07481342447 or email sales@wsgaragedoorspares.com. With both of these methods you can send images which we can use to help you identify the part you need.